What are the common problems encountered when using film winding machines?

Film winding machine, also known as winding packaging machine, is an automatic packaging equipment for packaging goods using winding film. The invention is suitable for rapid transportation or storage, has high adaptability, high efficiency, low consumption, reduces labor intensity, acts as a dust-proof, moisture-proof and cleaning agent for packaging materials, and reduces surface scratches on packaging materials. According to the degree of automation, the device can be categorized into semi-automatic and full-automatic, but no matter which kind of device it is, there will be the problem of matching with the winding film in the process of using. The following are some common problems encountered when using film winding machines:

I. Reasons and solutions of frequent film breakage of film winding machine.

1. Non-mechanical film. Both semi-automatic winding machine and full-automatic winding machine must use mechanical film. Many users have used manual film before, but they didn't use it up, so they consider to buy new film after they use it up on the winding machine, if the manual film can't reach the tensile strength of the winding machine, it will destroy the film naturally.

2、Machine film is not qualified. Not all machine films can be used on winding machines. According to general experience, the winding film used on the winding machine must be more than 2 wires, if it is too thin, the film will break. At this time, it is necessary to adjust the tension of the film to be smaller, which can play the role of protecting the film, but the result is a waste of film.

3、Film penetration error. This often happens to the first time users of the winding machine, who can't penetrate the film, resulting in the winding film can't be well fed out from the film holder, which in turn leads to the breakage of the winding film.

4. There are sharp objects on the surface of the package. This situation is easy to be ignored by customers, especially in wooden box packaging. They may not pay attention when nailing. The surface of the wooden box reveals a nail head, which is not noticed by the human eye. When winding, the film always breaks. At this time, the user can judge which of the above situations by where the film is broken. If the film on the package is broken, the package itself must be carefully checked for sharp objects and removed.

Second, the film blowing mechanism does not work. In-line winders have a film blowing mechanism, a structure that helps the film winder wrap the film head into the goods. However, customers often complain that this structure does not work, but in fact, it is because the angle of the customer is not adjusted properly.

Thirdly, the rotating speed is slow when the rotary disk stops. Since the wrapping machine needs to find the origin and the goods are relatively heavy, in order to ensure the safety of the wrapping process, the wrapping machine is designed to start slowly and stop slowly at the beginning, so it is recommended not to adjust this part quickly.

iv. The chassis rotates loudly. Many users have reported this problem. Customers will think it is a problem with the winder. This is not the case. If the chassis is particularly loud during operation, it is mostly caused by uneven ground. Users just need to observe and adjust.