High speed online automatically rotary ring wrapper

When the film tail is released from the clamp, the air shooter will blow the film tail up, then the film tail will be wrapped by stretch film and keep it tightly with the pallet to ensure no film tail produced.

Category：

Fully Automatic Online Pallet Wrapping System

+86-19163446819

info@kingpack-intelligent.com

Technology data:

Load size(mm)	L1200×W1000×H1200-1600 mm
Conveyor height	580 mm
Conveyor effective width	1200mm
Packing efficiency	50-60 loads / hour
Rotary ring speed	45rpm
Power supply	380V 50Hz 3P 4.5kw
Max load capacity	2000kgs
Working ambiance	Indoor, normal temperature

Wrapping material:

Stretch wrapping film:	Core size: 3
Film width:	500mm
Diameter:	max 240mm
Thickness:	12－35μm

One roll of stretch film to be supplied along with machine for trial running

Machie main frame

Gantry type frame, made of square steel tube, material: Q235 steel
Driving motor base is installed on the frame
The rotary ring are fixed on the frame connecting with slew bearing
Frame size: (to be confirmed by drawing)

Driving device for rotary ring

Frequency control motor with brake
Brand of motor: SEW
Power rated:1.5 KW
Rotary ring speed: n=45rpm (frequency motor with brake)
Two position limits equipped on two ends of rotary arm

Rotary ring lift device

The lifting and lowering of the swivel adopts chain transmission, which is stable and reliable.
Swivel lift drive reducer model: turbine worm reducer
Motor power: 3KW
Lift reducer: SEW

Film carriage

Open-door type pre-stretch film carriage, stretch ratio 250% (1m to 3m)
Film carriage lifting driving: chain driving, good stability and high reliability.
Driving reducer: worm gear reducer
Motor power: 0.55 kw
Motor: Local famous brand

Film auto feeding and cutting device

When stretch wrapping finish, the film will be cut and clamped automatically.
When the film tail is released from the clamp, the air shooter will blow the film tail up, then the film tail will be wrapped by stretch film and keep it tightly with the pallet to ensure no film tail produced.
Film hot melt cutting adopts electrical heating wire to cut the film.
After film being cut, the hot sealer will seal the film tail automatically to ensure no film tail come out.
Pneumatic component: AirTAC brand

Fully Automatic Online Pallet Wrapping System